产品中心/ PRODUCTS

我的位置:首页  >  产品中心  >    >  氮吹仪  >  NG-Mini 迷你氮吹仪
NG-Mini 迷你氮吹仪
  • 产品型号:
  • 厂商性质:生产厂家
  • 更新时间:2026-06-16
  • 访  问  量:11
简要描述:

NG-Mini 迷你氮吹仪主要用于样品的浓缩或制备(如药物筛选、激素分析、液相、及质谱分析中的样品制备)。

在线咨询

联系电话:010-62992996

产品详情

NG-Mini 迷你氮吹仪 

NG-Mini MINI Sample Concentrator  

产品简介

NG-Mini 迷你氮吹仪主要用于样品的浓缩或制备(如药物筛选、激素分析、液相、及质谱分析中的样品制备)。工作原理:通过将氮气吹入加热样品的表面,使样品中的溶剂快速蒸发、分离,从而达到样品无氧浓缩的目的,保持样品更纯净。使用氮吹仪代替常用的旋转蒸发仪进行浓缩,能同时浓缩多个样品,省时高效。

The nitrogen sample concentrator NG-Mini is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously.

 

产品特点:

1、特殊的气路控制*利设计,增强气密性减少漏气隐患;操作简单,提起/按下气针即可实现通道开关;每个通道的开关状态一目了然。

2、加热器使样品被快速加热至蒸发温度,同时气体经气针吹至溶液表面,促使溶液快速蒸发和样品浓缩。

3、气室组件高度可以调节,使之适用不同的试管,标准气针长度为150mm。

4、有6个气道控制开关,不浪费气体。

5、在浓缩有毒溶剂时,整个系统可置于通风柜中。

6、内置超温保护装置,自动故障检测及报警功能。

7、显示屏同步显示温度、时间,操作简单方便。

8、标准配备气室组件和专用可调节支架。

1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.

2. The position of gas needle in air chamber plate can be adjusted to suit for different types of tubes.

3. The height of the air chamber plate can be adjusted. The length of a standard gas needle is 150mm.

4. Separately blow of 6 needles and flow regulating of each needle are available to avoid gas waste.

5. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

6. Built in overheat protection, automatic fault detection and fault beep alarm devices.

7. LED displays immediate temperature and diminishing time. Operation is simple and convenient.

8. Standard configured air cavity and adjustable bracket.

 

产品技术参数:

型号

NG-Mini

温度范围

室温+5℃~100℃

升温时间

≤12min(从40℃升至100℃)

温度精度(100℃)

±0.5℃

温度精度(40℃)

±0.3℃

放置模块数量

1块

定时范围

1s ~ 999s或 1min~ 999min

氮气流量

0~10L/min

氮气压力

≤0.1MPa

最大功率

60W

外形尺寸

W.110 x D.156 x H.400 mm

净重

1.2kg

 

Model

NG-Mini

Temp. Range

R.T.+5℃~100℃

Heating Time

≤12min (From 40℃ to 100℃)

Temp. Accuracy (100℃)

±0.5℃

Temp. Accuracy(40℃)

±0.3℃

Blocks Quantity

1 Block

Time Range

1s ~ 999s or 1min ~ 999min

Nitrogen Flow Rate

0~10L/min

Nitrogen Pressure

≤0.1MPa

Power

60W

Dimensions(W×D×H)

W.110 x D.156 x H.400 mm

Net weight

1.2kg

 

型号

孔径及试管数

孔底形状

模块尺寸

Mini-C

6 x φ15mm

平底

47×71×32mm

Mini-D

6 x φ16mm

平底

47×71×32mm

Mini-F

定制

定制

定制

 

Cat#

  Tube Quantity &  Dia.of hole



  Mini-C

  6 x φ15mm



  Mini-D

  6 x φ16mm



  Mini-F

  Customized

  Customized

  Customized

 


在线咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7